2008 Toyota Avalon With Push To Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147787
Printed Date: May 14, 2024 at 11:39 PM

Topic: 2008 Toyota Avalon With Push To Start

Posted By: zzhummer
Subject: 2008 Toyota Avalon With Push To Start
Date Posted: October 30, 2023 at 10:42 AM

Installation on a 2008 Toyota Avalon with push to start. Do I use the ignition wires from the push to start switch and use a relay to make make them (+). Wiring diagram shows ignition 1 and 2 as (-)

Replies:

Posted By: kreg357
Date Posted: November 02, 2023 at 12:54 PM

Need more info. What Remote Start make and model and bypass module are you using?

-------------
Soldering is fun!

Posted By: zzhummer
Date Posted: November 23, 2023 at 6:49 AM

Avital 4115 and PKALL. I used a relay to change the remote start + output to a - output and it work fine.

Print Page | Close Window