Print Page | Close Window

Blade-AL Or Similar, 2013-2017 Dodge Viper

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147949
Printed Date: May 14, 2024 at 10:19 AM


Topic: Blade-AL Or Similar, 2013-2017 Dodge Viper

Posted By: occpilot
Subject: Blade-AL Or Similar, 2013-2017 Dodge Viper
Date Posted: March 02, 2024 at 10:50 PM

Hello,

I was wondering if anyone has had any luck with doing a non-analog install of a compustar/blade-al on a fifth generation dodge viper 2013-2017? I used the t-harness for a dodge/chrysler and everything connected as it should. The problem is that when I flash the blade-al using a charger/challenger of similar year (CH7), it doesn't recognize the unlock/lock codes. I was hoping that there was a firmware that someone has gotten to work. The BCM seems similar to the other dodge products.

Thank you


Print Page | Close Window