Compustar CM6200 vs CM7200?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147959
Printed Date: May 14, 2024 at 8:20 AM
Topic: Compustar CM6200 vs CM7200?
Posted By: moparguy98
Subject: Compustar CM6200 vs CM7200?
Date Posted: March 12, 2024 at 5:03 PM
I have a 6200 module from around 2009 and a 7200 module from around 2014. Wondering which one to use. Im using a Blade AL for the immobilizer and the vehicle Is a 2003 Jeep Grand Cherokee. What's the difference?
Replies:
Posted By: kreg357
Date Posted: March 12, 2024 at 9:14 PM
Either will work. My preference leans towards the CM7200. While I've never had any issues with the CM6200, my gut thinks the CM7200 handles high current ignition wires better with its separate +12V 30 Amp constant inputs.
Here is a link to a Pictorial on your vehicle : https://www.the12volt.com/installbay/forum_posts.asp?tid=137527
You will need a 1,300 ohm resister for the Parking Light control via the MUX wire (and possibly a relay).
-------------
Soldering is fun!
|