SW2 + RS3 wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15711
Printed Date: May 29, 2024 at 1:41 AM

Topic: SW2 + RS3 wiring

Posted By: rudbwoy69camaro
Subject: SW2 + RS3 wiring
Date Posted: July 01, 2003 at 9:45 AM

Correct me if I am wrong. I will need to use diagram 3. yellow wire of sw2 to RED / white of rs3, green wire of sw2 to orange of rs3, and for the WHITE/ yellow of the sw2;relay to reverse polarity to connect to the brown wire(+) of the rs3. Diode on the green wire, and WHITE/ yellow wire of sw2. Please let me know. (Sorry about the size of the pic)

Thank you in advance for your time.

posted_image

-------------

Replies:

Posted By: mr12volt
Date Posted: July 02, 2003 at 8:35 PM

What was the Question???

Posted By: rudbwoy69camaro
Date Posted: July 03, 2003 at 12:03 AM

In reply to "mr12volt" :

I am connecting the Smartwindows 2 to the Matrix RS3. I have the diagram posted above, and am asking if this is the correct way to wire it.

-------------

Posted By: nighthawk2k
Date Posted: July 03, 2003 at 2:39 AM

Ok what you want to do is:

1. Connect the green wire of the Sw2 to the orange starter kill wire. Use two Diodes. One to the Starter Kill and one to the windows. The stripe of the diodes goes towards the brain of the alarm.

2. Connect the Yellow wire of the sw2 to the Purple black wire(CH4) do not hook it to CH2 because channel 2 has a silent/latch feature.

3. Use a relay to tap onto the siren's (+) signal to make it ground for the windows.

85- Siren
86- Ground
30- SW2 WHITE/ Yellow
87a- (N/C) Nothing Here
87- (N/O) Chassis Ground

That's it for the install of the SW2 Module to a RS3.

Good Luck
If you have any questions feel free to ask

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image