viper led problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15758
Printed Date: June 01, 2024 at 3:26 PM

Topic: viper led problem

Posted By: ramsfan
Subject: viper led problem
Date Posted: July 01, 2003 at 10:43 PM

I installed a viper 500+ alarm in a 2003 ford f150.I hooked up a relay for domelight supervision which is working.When i arm the alarm i get one chirp followed by another chirp and the led will flash 3 times stop and instead of a constant flash .Any thoughts on why this is happening.

Replies:

Posted By: mr12volt
Date Posted: July 02, 2003 at 7:24 PM

The dome supervision delay is causing the alarm to think a door was left open. That is what the second chirp is for. It should still protect all zones of alarm after the dome light shuts off.

Print Page | Close Window