need help with new alarm on truck

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18355
Printed Date: May 17, 2024 at 10:50 PM

Topic: need help with new alarm on truck

Posted By: bear80
Subject: need help with new alarm on truck
Date Posted: September 01, 2003 at 7:43 PM

i got me a 2003 silverado i am going to try to install a new car alarm in it my truck has no elec. lock 's in it the alarm has a lock&unlock on it if it has built in relay 's for door lock i got some door lock actuators motors for it will i need more for this to lock&unlock my doors and if some one can help me with the wiring on this truck the alarm is a performance teknique alarm with start motor is it hard to install or what :errr:

Replies:

Posted By: draasch
Date Posted: September 01, 2003 at 7:57 PM

what type of output do you have on the alarm?????

look at this info:door locks under car security to the left of this screen
<---------
look towards the bottom of the list:
Added Actuator(s)

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: samdub
Date Posted: September 01, 2003 at 10:33 PM

if your alarm has built in relays you should only need actuators, as far as remote start you need too know if the truck has a passlock system if so you will need a bypass there are two different passlocks gm still uses 2 or 3

Posted By: samdub
Date Posted: September 01, 2003 at 10:41 PM

according too the info i have it has passlock 2 if any at all, you will need a gm passlock 2 bypass this install is difficult

Posted By: bear80
Date Posted: September 02, 2003 at 5:30 PM

thank's for all you guy's help

Print Page | Close Window