555C on 02 Dodge Ram
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18466
Printed Date: June 16, 2024 at 2:29 PM
Topic: 555C on 02 Dodge Ram
Posted By: gatightlines
Subject: 555C on 02 Dodge Ram
Date Posted: September 03, 2003 at 11:16 PM
Anyone have a problem programming this security bypass device? I have the wait-to-start wire and go through the steps to program however, my truck is not picking up the device.
Replies:
Posted By: anonymous
Date Posted: September 04, 2003 at 10:59 AM
Some of the Chrysler/Dodge vehicles need the ACC wire to be powered up when doing 555C programming. Unfortunately the wait to start doesn't power the ACC. Try temporarily jumping the IGN and ACC together while programming. I also always use the vehicle's owners manual for programming proceedure rather than the sheet that comes from DEI.
Happy metering
Anonymous
Posted By: JWorm
Date Posted: September 04, 2003 at 9:35 PM
Where are you holding the 555C capsule? Chryslers are very trick. Hold is about 3/4" from the key cylinder in the same position you would if it was a key that you were inserting. If you hold it too close, it won't work.
Posted By: gatightlines
Date Posted: September 06, 2003 at 4:27 PM
I move the green and orange wire from the truck to ign 3 wire from the alarm. This allowed the 555C to program. Truck now remote starts without key.
|