auto start w/ "add a channel" problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=18947
Printed Date: May 14, 2024 at 10:22 PM

Topic: auto start w/ "add a channel" problem

Posted By: attackdog
Subject: auto start w/ "add a channel" problem
Date Posted: September 17, 2003 at 11:53 AM

Hi all. I have an auto starter and am using an "add a channel" to trigger the starter so I can use my factory remote. It has worked fine for the past 3 years and now it will not work. I tested the auto start and "add a channel" seperate from each other and they both work fine, the auto start starts the car and the "add a channel" sends a good ground. I even tried to add a relay to get a true ground and that did not work either. Any ideas would be appreciated. Thanks.

Replies:

Posted By: floaterr
Date Posted: September 17, 2003 at 12:55 PM

Did the relay flip?

How are you testing the auto starter?

did you try grounding the auto starts wire to make sure that it's input did work?

Print Page | Close Window