How to block a PATS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1899
Printed Date: May 15, 2024 at 6:17 PM

Topic: How to block a PATS

Posted By: roma66mx
Subject: How to block a PATS
Date Posted: July 12, 2002 at 3:45 PM

Oance again , I need to know how to bypass a PATS on a FORD expedition 2000 , the problem is , I have only one key with code , I try many ways , but allways request to have a second key and I don't have ; do you know one way that required only one key ?

Thanks for your help .

Replies:

Posted By: mobiletoys2002
Date Posted: July 12, 2002 at 4:37 PM

i see there is a keyless module available for your truck. this is the best way to do it because you will not have to get rid of any keys go here and see the module i am talking about.https://https://www.bypasskit.com/shop/details.asp?prodid=PKF&cat=12&path=1,12

Posted By: Steve #1
Date Posted: July 12, 2002 at 10:17 PM

Your 2000 Expy uses PATS II. It requires TWO keys to add any additional keys (or chips like the bypass uses). You will need to take it to a dealer, or a locksmith with an NGS in order to program new keys or the bypass.

Your other option is to remove the chip from the key you have and attach the chip to the ignition cylinder then you can use a regular key to start the vehicle, but this completely defeats the PATS system.

Posted By: Velocity Motors
Date Posted: July 12, 2002 at 10:59 PM

We sell bypasses for the 1999-2001 Explorer that does not need an additional key to bypass the PATS, they are $ 45.00 for each unit + shipping.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: roma66mx
Date Posted: July 15, 2002 at 3:11 PM

Thank you for all of you , your comments help me at lot , I apreciated .

Regards .

Posted By: mike simonelli
Date Posted: July 15, 2002 at 9:49 PM

take the key that you have. there is a small square on the top of the key pop it off and pull out the chip. take the white chip and wire tie itor glue it to your key cylinder . move it around untill you get the right spot.

Posted By: Velocity Motors
Date Posted: July 16, 2002 at 12:40 AM

This will bypass your PATS permanently or until the pellet falls off and then your SOL !!

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA