disarming factory alarm when remote pop
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19064
Printed Date: June 07, 2024 at 12:16 PM
Topic: disarming factory alarm when remote pop
Posted By: jac2
Subject: disarming factory alarm when remote pop
Date Posted: September 19, 2003 at 7:31 PM
i need to know is there anyway to disarm the factory alarm when remote pop the trunk??i recently add remote popping trunk to my alarm (hornet 554t)in 2000 honda accord v6 coupe and i always have to unlock the door before using it!
Replies:
Posted By: JWorm
Date Posted: September 19, 2003 at 9:16 PM
Split the trunk release wire (RED / white) with 2 diodes. Send one part to the cars factory alarm disarm wire, and the other to the trunk release trigger
Posted By: JWorm
Date Posted: September 19, 2003 at 9:42 PM
Now that I think about it, I think you can automatically have it pulse the disarm wire when you do the trunk release. You just need to change a setting in programming. You should already be hooked up to the factory alarm disarm wire.
From a DEI manual...
In the default setting the factory alarm disarm output will disarm the factory alarm system any time the button controlling ch 2 is pressed.
Posted By: jac2
Date Posted: September 19, 2003 at 10:44 PM
thanks alot!.,....so i dont have to follow the direction as your 1st reply??because right now im running default setting.and i just saw the manual for programming,the default setting,it will disarm the factory alarm on 2nd channel and also auxiliary output,does it mean i have to follow your 1st reply then after that it will disarm the factory alarm?also where do i have to face the stripe end on diodes if i have to do that?and i dont know if im using 2nd channel or aux output??i press aux button to pop the trunk.thanks-
Posted By: jac2
Date Posted: September 20, 2003 at 8:48 PM
nevermind,i set to default setting for both 2nd channel and auxiliary output to disarm the alarm when i remote pop the trunk.when i switch to none default setting either one, the factory alarm triggers.anyways thanks alot! 
|