02 dodge ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=1907
Printed Date: October 31, 2024 at 7:18 PM

Topic: 02 dodge ram

Posted By: dan768
Subject: 02 dodge ram
Date Posted: July 13, 2002 at 1:51 AM

When I install an aftermarket alarm on top of the rams o.e.keyless I grab three motor wires that act real screwy, I have been hooking up my arm , disarm, and 2 disarm each to ground through 10k ohm resistors, with a 1k ohm on my arm (in line) to prevent arming on auto unlock.

Has anyone seen this type of behavior on motor wires?

Got any other tricks?

-------------
dan
Remember (there are no hard cars,some just take longer to install on then others)

Replies:

Posted By: christophe
Date Posted: July 13, 2002 at 8:25 PM

I've got arm/lock as a neg. trigger through a 2k ohm and disarm neg. 480 ohm. btw disarm w/o unlock 1 pulse double pulse to unlock.

Print Page | Close Window