DEI 500T hook up ?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19477
Printed Date: May 31, 2024 at 9:39 PM
Topic: DEI 500T hook up ?
Posted By: michaeltam2k
Subject: DEI 500T hook up ?
Date Posted: September 29, 2003 at 6:24 PM
I need help please . I need to know how do yuo hook this motion detector to a clifford respnder matris rsx3.5 on 03 sequoia ...anyone help thank you so much ....
Replies:
Posted By: JWorm
Date Posted: September 29, 2003 at 6:45 PM
500T??? Do you mean a 508D?
Red to power, black to ground, blue and green joined together to the green wire dangling off the shock sensor harness.
Ever get you factory alarm disarm working, and your doorlocks?
Posted By: michaeltam2k
Date Posted: September 29, 2003 at 6:53 PM
yes i did have the fac.alarm to work now but still couldn't figure out to have it passive arming .anyway it's the dei 500t and it have only 2 wire blue and black
Posted By: JWorm
Date Posted: September 29, 2003 at 7:16 PM
I am familiar with almost every DEI product, and have never heard of that model number. Their website is down now, so I can't check it for info.
Posted By: michaeltam2k
Date Posted: September 29, 2003 at 9:41 PM
JWorm , THANKS ALOT WILL YOU LET ME KNOW AGAIN THANK YOU
Posted By: c2deez
Date Posted: September 29, 2003 at 9:50 PM
I think the 500T is a tilt sensor, not a space diturbance sensor.
Black--chassis ground
Blue--1.blue neg inst trigger input, OR 2.green neg door trigger(use diodes to isolate), OR 3. blue wire(possibly the green wire) of impact sensor--whichever is the full stage trigger.
Posted By: michaeltam2k
Date Posted: September 29, 2003 at 9:55 PM
c2deez , thank you for the information .
|