2003 impala remote start prob.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20442
Printed Date: May 21, 2024 at 7:13 AM
Topic: 2003 impala remote start prob.
Posted By: csorb
Subject: 2003 impala remote start prob.
Date Posted: October 22, 2003 at 6:46 PM
Hi. We installed an aps-685 into a 2003 Impala. When the car is remote started the SERVICE ENGINE SOON light turns on. We followed the DEI wiring sheet and used the 555L
Replies:
Posted By: GottaBNeat
Date Posted: October 22, 2003 at 7:40 PM
On the aps did you make the 2nd ignition stay on while cranking? Default setting on audiovox remote starts does not have that set to stay on when the starter cranks the car. Also, on the new Chevy's you have to hook up the brown wire. You used to be able to get away with not hooking them up, but not anymore. Hope that helps.
Posted By: daniel2002p
Date Posted: October 22, 2003 at 7:54 PM
The problem is the second accesory wire, it will kcik on the SES light. Fix the settings on the alarm, and that should make it go off.
-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
Posted By: NowYaKnow
Date Posted: October 22, 2003 at 8:48 PM
Did you cut the wire and add a relay in for the parking lights? (Assuming you used the white wire @ the BCM). If not then I would check that or like others said it could be your missing an accessory wire. Good luck,
Mike
From the DEI info:
PARKING LIGHTS -|white *8 | |pink 24-pin plug @ BCM *3
*8 Must isolate this wire from the BCM when doing remote start to avoid 'service engine soon' light. See directfax document #1600 for wiring information.
Posted By: csorb
Date Posted: October 22, 2003 at 8:50 PM
daniel2002p di you mean the 2nd ignition?
I will try all those things. Thanks guys.
Posted By: GottaBNeat
Date Posted: October 23, 2003 at 9:16 PM
NowYaKnow has a point with the light relay. That will also trigger that light via the bcm. Totally forgot bout that. I use positive at the switch.
Posted By: daniel2002p
Date Posted: October 24, 2003 at 6:50 AM
csorb] wrote:
aniel2002p di you mean the 2nd ignition?
Yes sorry, second ignition! ------------- 2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!
|