Print Page | Close Window

grand cherokee windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20461
Printed Date: June 10, 2024 at 6:25 PM


Topic: grand cherokee windows

Posted By: bugluvr38
Subject: grand cherokee windows
Date Posted: October 23, 2003 at 6:13 AM

does anyone happen to know the windows up/windows down wires for the rear windows of a 93 grand cherokee?  i looked in the vehicle information page, but it only lists the front windows.  so if anyone knows off hand, i would appreciate it.  thanks in advance!

-------------
oh, god... what did i do now??



Replies:

Posted By: Velocity Motors
Date Posted: October 23, 2003 at 6:50 AM
|  LR WINDOW UP/DN|blu/wht - RED / blk   |A  |drivers switch or kick panel|
|  RR WINDOW UP/DN|gry/blk - grn/wht   |A  |drivers switch or kick panel|


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: bugluvr38
Date Posted: October 27, 2003 at 1:36 AM
thanks, jeff!

-------------
oh, god... what did i do now??




Posted By: bugluvr38
Date Posted: October 27, 2003 at 1:49 AM
can someone please explain thisi just installed a four-window roll up module (omega au 93.4) in my 93 grand cherokee.  i hooked it up via my crimestopper cs2000 series ii.  everything works fine.  however, i removed the door chime box (among other things) when i was installing it, just to get it out of the way.  after i put everything back together, it wouldnt work.  after a lot of guess and check work, i figured out that it was because of the door chime box.  if i plug it (chime) in, the window module will not work.  if i take it out, the window module works fine.  so somebody please not only help me solve this problem, but explain why this happens?  i am just baffled!  thanks!

-------------
oh, god... what did i do now??




Posted By: Velocity Motors
Date Posted: October 27, 2003 at 8:01 AM
Where did you ground the module ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: bugluvr38
Date Posted: October 28, 2003 at 2:53 AM
i grounded it under a screw that screws into the metal plate under the dash on the drivers side, just left of the steering column.  as far as i know, this is just a structural piece of metal.  but im going to go take a break right now and have a closer look because you have given me a thought or two.  thanks!

-------------
oh, god... what did i do now??




Posted By: bugluvr38
Date Posted: October 28, 2003 at 4:00 AM
well, i dont see any reason why this would be a problem.  what was your thought?  im sure you know better than i do.

-------------
oh, god... what did i do now??




Posted By: Velocity Motors
Date Posted: October 28, 2003 at 10:15 AM

Just pulling possibilities out of the air. Wanted to make sure that you checked everything.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window