power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20984
Printed Date: May 21, 2024 at 6:39 AM

Topic: power windows

Posted By: draasch
Subject: power windows
Date Posted: November 04, 2003 at 9:22 AM

I have installed a SPAL 2 door power window kit.
I have some factory switches that i would like to use.

im not sure of the color codes....
the driver has a:
blk
brn
tan
L/blue
dk/blue
gray

the pass. has:
2 brn
blk
L/blue
tan
dk/blue

anyinfo would be great.........

thks

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Replies:

Posted By: GottaBNeat
Date Posted: November 04, 2003 at 5:55 PM

You can use those switches with relays to activate your window motors. Just wire the relays as if you were going to do actuators (using the window motors as the actuators) and use the switches to send ground to the relays. Just take a dmm and find the common and put that to ground, and then test for the up contact wire and down contact wire. I have done it on lots of cars and it worx like a champ. Hope that helps.

Posted By: draasch
Date Posted: November 04, 2003 at 6:48 PM

i got the windows done today.....i didnt need relays.
i just wired up the switches and evrything worked great..

thks

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window