Ignition wire relay necessary?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21100
Printed Date: October 31, 2024 at 5:51 PM
Topic: Ignition wire relay necessary?
Posted By: Mike_89gts
Subject: Ignition wire relay necessary?
Date Posted: November 06, 2003 at 5:37 PM
I'm gonna install a car starter on the g/f's 95 neon.
It (the car) has 2 ignition wires and I read somewhere they
should both be connected to the car starter module using
a relay rather than just connecting one of them.
How the heck would that look?
So, I have 1 ignition wire coming from the car starter module,
2 coming from my ignition switch. - What now?
What goes where on the relay?
Is it really necessary?
Any tips out there?
Thanks in advance,
Mike '89GTS
Replies:
Posted By: JWorm
Date Posted: November 06, 2003 at 6:08 PM
Almost every remote starter out there today has at least 2 ignitons and 1 accessory outputs.
Do you have the remote starter yet? What kind is it?
Posted By: Mike_89gts
Date Posted: November 06, 2003 at 6:51 PM
It's a ProStart. - It's actually made in Canada.
I don't know if you guys have it down there?
Can I email you the diagrams I got?
I need a little help.
You can send your email address to me at
fly_graphics@hotmail.com if you wish.
Would appreciate your help!
Thanks,
Mike
|