power window module install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21768
Printed Date: May 23, 2024 at 3:09 AM

Topic: power window module install

Posted By: jdm-dc2
Subject: power window module install
Date Posted: November 21, 2003 at 9:27 PM

im installing a generic no name power window module to roll up my windows when i arm my car. My alarm puts out an 250ma (-) and the module says it needs 500ma (-) to work. My question is that do i need to use a relay to make it work? thanks ahead of time.

Replies:

Posted By: mobiletoys2002
Date Posted: November 21, 2003 at 11:38 PM

i would think the 250 ma output will work, but if it does not then yes you will need a relay to step up the ground to a suitable signal for the window module to operate.

Print Page | Close Window