Command start cs 2400 bypass hook-up

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22863
Printed Date: May 15, 2024 at 10:46 AM

Topic: Command start cs 2400 bypass hook-up

Posted By: chrisjo
Subject: Command start cs 2400 bypass hook-up
Date Posted: December 15, 2003 at 7:19 AM

I don't have a wiring diagram for the cs 2400; which wire can I use to hook up a transponder bypass module?

Replies:

Posted By: Velocity Motors
Date Posted: December 15, 2003 at 3:19 PM

You will need to use the VIOLET wire and program it too in channel 2 Step 4 option II

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: chrisjo
Date Posted: December 16, 2003 at 8:06 AM

Thanks Velocity Motors, do you have the installation instructions for the cs 2400? I'm not sure what you mean by programming it in channel 2 step 4.

I am doing this for a friend who bought the 2400 a few years ago and had it recently installed by a dealership but they told him that it wouldn't work because of the PATS, they told him to get one from them. I think it should work with a bypass module. ( this one is in a 2003 windstar)

Print Page | Close Window