Print Page | Close Window

1995 ford taurus doorlocks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23693
Printed Date: June 01, 2024 at 5:39 PM


Topic: 1995 ford taurus doorlocks

Posted By: Apollo 2
Subject: 1995 ford taurus doorlocks
Date Posted: December 31, 2003 at 9:36 PM

Having installed a prostart ct-3300 in my 1995 taurus, I still need some help with the doorlock wiring. I know the wiring is lock is pink / YELLOW, unlock is pink/green and the door pin wire is BLACK/ white. I know I need a couple of relays because the remote output is -500 mAmps, but how do I wire the relays so the doors lock and unlock?




Replies:

Posted By: ck auto
Date Posted: December 31, 2003 at 9:57 PM
hi if its keyless verson negative trigger don't worry about relays done a tone of prostarts that way and never a problem the dome light needs a relay though

-------------
good luck
kirk




Posted By: Apollo 2
Date Posted: January 01, 2004 at 7:29 AM

posted_image

thanks for the reply, the wires from the remote control module are negative as you stated but the car is not a keyless model. Still thinking i need relays and info on how to wire them.

Thanks





Posted By: ck auto
Date Posted: January 01, 2004 at 10:52 AM

the wires are negative don't worry about a relay the rs lock wires will work just fine. direct wire it i just did a 96 sable yesterday that way your trunk release could be negtaive as well just direct wire that as well



-------------
good luck
kirk




Posted By: japanime83
Date Posted: January 01, 2004 at 5:18 PM

This diagram should help you alot! -Kitt

posted_image





Posted By: japanime83
Date Posted: January 01, 2004 at 5:19 PM

if the image doesnt display click the link https://kitt050383.tripod.com/doorlocks.JPG

-kitt





Posted By: japanime83
Date Posted: January 01, 2004 at 9:43 PM

ok i fixed the problem with tripod! heres the link!

https://kitt050383.tripod.com/doorlocks.html

-kitt






Print Page | Close Window