keyless entry & door lock switch conflict

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24832
Printed Date: June 09, 2024 at 10:06 AM

Topic: keyless entry & door lock switch conflict

Posted By: Catfish45
Subject: keyless entry & door lock switch conflict
Date Posted: January 18, 2004 at 4:13 PM

I added aftermarket door lock actuators, factory door lock switches and a remote keyless entry kit. I used this diagram https://www.the12volt.com/images/actuatorrevpol.gif and hooked the alarm unlock output and switch unlock output to the same spot (85), then hooked the alarm lock output and switch lock output to the same spot (86). It works ok like this except that my keyless entry kit is really made to unlock the drivers side first, then the passengers side next (using a seperate wire) IF the unlock button is hit 2x. My problem is, the way its wired up, hitting the unlock button on the remote unlocks both doors at the same time. Now, I was wondering if I hooked the keyless entry unlock output up to the unlock wire on the actuator and put a diode between the alarm unlock wire and the relay to prevent any power from going back thru the wires and unlocking the passenger side if this would work or not. And here is a diagram of what I am thinking of trying https://home.austin.rr.com/waterdogs2/relayedit.JPG
Thanks!
-Rob

Replies:

Posted By: draasch
Date Posted: January 18, 2004 at 5:52 PM

you need to hit the motor wires in the drivers door..

https://wiringinstructions.com/220.htm

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Catfish45
Date Posted: January 18, 2004 at 8:22 PM

you mean the wires from the alarm, hook them straight up to the actuator instead of going thru the relay?

Posted By: draasch
Date Posted: January 18, 2004 at 8:24 PM

no click and paste the above site that i posted for you

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: Catfish45
Date Posted: January 18, 2004 at 8:36 PM

sorry I just dont really understand that diagram. so I need that special 3 relay setup? I dont really see how this is for my setup. Could you maybe explain it a little more? Thanks!

-Rob

Posted By: dumblucky1
Date Posted: February 17, 2004 at 7:49 PM

btt