clifford arrow 3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=24922
Printed Date: June 08, 2024 at 9:44 PM

Topic: clifford arrow 3

Posted By: rsturboboy2
Subject: clifford arrow 3
Date Posted: January 20, 2004 at 2:42 AM

has any one ot a clifford arrow 3 wiring diagram ?? i have a few wires that are not listed on me mates insrutions i think they are the engine imob wires and i need to no the wires for the centrel door locking to if ya can help many thank in advance

Replies:

Posted By: abright52
Date Posted: January 20, 2004 at 3:23 AM

Arrow 3 Owners Manual

Arrow 3 Wiring

-------------

Posted By: rsturboboy2
Date Posted: January 20, 2004 at 9:11 AM

hi peeps i have a clifford arrow 3 i cant get the alarm to work well it might need the codes restetting to to the alarm from the remote but as it stands at the mo soon as i touch the earth lead to the batterie the alarm starts to go off but if you leave the alarm going till it stops all you get is the led light just stays on and cant get the alarm to do any thing if it helps matters the alarm has not been fitted for 2 years oh and the voltage in the battirie is 5.2 volts plase some one help me cant afford £45 pounds an hour and clifford say just have to take it to a dealer

Posted By: Velocity Motors
Date Posted: January 20, 2004 at 9:35 AM

Try reprogramming the remote control to the CPU on the alarm. Also, the voltage that you have for the battery......... which one are you referring to ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA