2004 Mazda 3, Freedom 500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=26053
Printed Date: May 31, 2024 at 11:52 PM

Topic: 2004 Mazda 3, Freedom 500

Posted By: Colbrz
Subject: 2004 Mazda 3, Freedom 500
Date Posted: February 08, 2004 at 10:56 AM

2004 Mazda 3 I tried to install a Freedom 500, It went pretty good til I tried to get the dome light to activate the alarm I think I jacked it up. wel not the alrm but the door mechanism, because I had to ground the black and yellow wire directly in order to turn off the door open light plus dome light need help?

-------------
Colbrz

Replies:

Posted By: Colbrz
Date Posted: February 08, 2004 at 11:23 AM

Still no answer? I cant get the dome light to kick in. I don't know if it's pos or neg. can anyone help?

-------------
Colbrz

Posted By: Colbrz
Date Posted: February 08, 2004 at 11:35 AM

Is the door pos or neg dome light activation on a Mazda3 2004 model can anyone help even if youcant help post something

-------------
Colbrz

Posted By: Colbrz
Date Posted: February 08, 2004 at 11:42 AM

I need the wiring schematics to install a Freedom 500 Alarm. I got all of installed but he door activation by way of dome light. Can you Help

-------------
Colbrz

Posted By: whitey
Date Posted: February 08, 2004 at 1:23 PM

04 mazda 3 the door pins are + on the passanger side right behind the glove box. I thing the conector color is brown is I remember. Each door will have it's own wire you must use all and diode isolate each one. I can't remember the colors right now but i aure they were all black wires with different color traces.

Hope that helps

-------------
Visions Edmonton
Installation Manager, DLS
MECP Certified First Class

Posted By: technodigifreak
Date Posted: February 08, 2004 at 6:42 PM

its new enough that you will probably have to go to the service/parts department at the stealership and request a printing of the diagram

-------------
Hot-Modder

Posted By: Colbrz
Date Posted: February 09, 2004 at 10:06 AM

Thanks It did

-------------
Colbrz

Posted By: Colbrz
Date Posted: February 09, 2004 at 10:08 AM

thanks

-------------
Colbrz