clifford xl1000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2717
Printed Date: June 09, 2024 at 7:00 AM

Topic: clifford xl1000

Posted By: ShaunD912
Subject: clifford xl1000
Date Posted: August 12, 2002 at 11:55 AM

Hello

I am installing a clifford xl1000. I don't have the install manual and can't find it. I do however have the wiring diagram. There is one thing I'd like to verify. The diagram shows a wire for +/- door trigger and a wire for interior light supply. I'm installing in a 98 atima which has - door triggers. I'm guessing that I'm supposed to connect the light supply wire to ground because of the - door trigger. Please let me know if this is correct. Thanks.

Replies:

Posted By: Velocity Motors
Date Posted: August 12, 2002 at 2:59 PM

Here is a link to the owner's manual. : https://www.the12volt.com/downloads/file.asp?ID=264

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: ShaunD912
Date Posted: December 12, 2002 at 11:19 PM

Does anybody know where I can get a replacement remote for this alarm? I am looking for the 4 button/4 channel remote. Thanks.

Posted By: 10nesne1
Date Posted: December 13, 2002 at 12:00 AM

https://www.clifford.com/guides/wiring/xl1000_wiring.pdf

Print Page | Close Window