mazda mpv 2003
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28150
Printed Date: June 16, 2024 at 3:52 AM
Topic: mazda mpv 2003
Posted By: mikelo
Subject: mazda mpv 2003
Date Posted: March 10, 2004 at 10:04 PM
Today, I install a primestart x20 onto a Mazda Mpv 2003.
After the tach. wire connected, and tach learning sucessful. All the alarm function are working well, except the remote starting. After the remote start button was pressed, one beep comes out which means acknowledgement of remote signal, but the car is not started and giving out 2 beeps.
Can anyone please teach me what to do and what is wrong ?
Note : after the remote start button pressed, a positive has appeared on the starter wire, but no cranking.
Also the car is not equipped with imobiliser
Replies:
Posted By: mobile1
Date Posted: March 10, 2004 at 11:38 PM
check your ignition wires
Posted By: Velocity Motors
Date Posted: March 10, 2004 at 11:44 PM
That's weird because even if you have an ignition wire not being powered up, giving 12 volts to the starter wire should still engage the starter solenoid. My information tells me that you do have an immobilizer system for the starter & fuel management system on this van. Have you tried placing the key in the cylinder and trying to start the vehicle ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mikelo
Date Posted: March 11, 2004 at 12:27 AM
The ignition wire has been checked correctly connected.
I have put the key into the cylinder, but same result.
mike
Posted By: cbag1
Date Posted: March 11, 2004 at 11:52 AM
This vehicle has an immobilizer system that needs to be bypassed when adding remote start. check this site howto: https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1061.pdf
|