Put in remote starter and lost power

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=28993
Printed Date: May 10, 2024 at 4:25 AM

Topic: Put in remote starter and lost power

Posted By: Rhettd
Subject: Put in remote starter and lost power
Date Posted: March 25, 2004 at 3:22 AM

I've got a 99 suburban. I just completed puting in the viper 751 remote start/alarm, that works like a charm thanks to the help of fellow members on here. Now my problem is that I cant get any power when I drive it, the rpm wont go over 2000. You can push the pedal all the way down to the floor and it doesnt make any differance, it still stays around 1500-2000rpm. What could be causeing that and how can I fix it. :errr::x

Replies:

Posted By: derek123
Date Posted: March 25, 2004 at 8:25 AM

Sounds like your missing second Ignition (white)...

What all do you have connected at the Ignition switch ?

Posted By: Velocity Motors
Date Posted: March 25, 2004 at 8:38 AM

I second that suggestion and I highly suggest not driving the truck again ( after remote start ) until you get that 2nd IGN wire hooked up. I foresee a new transmission in the very near future for you.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Rhettd
Date Posted: March 25, 2004 at 2:42 PM

I thought the 2nd ignition was optional.

Posted By: draasch
Date Posted: March 25, 2004 at 2:59 PM

on some cars you dont need it, newer ones you do....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window