hi forum, I'm looking for a wiring diagram fro a 2004 toyota corolla. I'm installing a remote start.
should be the same as the 2003, also when you are doing the wiring, you can remove just the steering column cover, by removing the screws that you see when you turn the wheel. It'll make it easier then removing the underdash
Here is the alarm wiring details you will need,
Code:
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white & black |+ |ignition harness |
| STARTER|red |+ |ignition harness |
| IGNITION|BLACK / YELLOW |+ |ignition harness |
| SECOND IGNITION|BLACK/ white |+ |ignition harness |
| ACCESSORY|blue/red |+ |ignition harness |
| POWER LOCK|green *1 |- |passenger kick panel |
| POWER UNLOCK|blue/black *1 |- |passenger kick panel |
| LOCK MOTOR|blue | |driver kick, door harness |
| UNLOCK MOTOR|red | |driver kick, door harness |
| DISARM DEFEAT|red | |driver kick, harness to rear|
| PARKING LIGHTS +|green | |driver kick panel |
| PARKING LIGHTS -|GREEN / WHITE | |headlight switch |
| HEADLIGHTS|red |- |headlight switch |
| DOOR TRIGGER|RED / yellow |- |driver kick panel |
| DOME SUPERVISION|comes on with unlock| | |
| TRUNK/HATCH PIN|RED / white |- |light in trunk |
| TACHOMETER|*2 | |ignition coils |
| BRAKE WIRE|GREEN / WHITE |+ |brake pedal switch |
| HORN TRIGGER|GREEN / WHITE |- |steering column |
Notes:
*1 These are the passenger key cylinder wires. Meter the wires while turning the key in the passenger door.
*2 Go to any one of the ignition coils under the black motor cover and use RED / blue, YELLOW /GREEN, gray, or white.
MY QUESTION IS:
if my alarm has only 1 ignition + input, and I have wired the FIRST IGNITION to the alarm, where do I put the other SECOND IGNITION wire from the corolla?
https://www.velocitymotorsport.com/images/install_notes/2nd_ignition_relay.jpg-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA