alarms using the factory keyless

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2950
Printed Date: May 17, 2024 at 6:07 PM

Topic: alarms using the factory keyless

Posted By: 1nicemustang
Subject: alarms using the factory keyless
Date Posted: August 20, 2002 at 8:08 PM

hey everyone.........what alarms are offered out there that will utilize the factory keyless and remote system on a ford mustang? i dont want to have to carry two remotes with me.

-------------
Lee

Replies:

Posted By: gotoevolution
Date Posted: August 20, 2002 at 10:10 PM

Well if I'm not mistaken and I believe that I am not most alarms come with the standard option of being wired to unlock all the doors in the car when the alarm is deactivated and a relay can be used to used the remote start for the car, all these are standard options for any alarm.

Learn to evolve, EVOLUTION

Posted By: RAY562
Date Posted: August 20, 2002 at 11:08 PM

hey what year is your mustang?

-------------
Ford Motor Company Alarm Tech

Posted By: dkeenan
Date Posted: August 21, 2002 at 3:44 AM

There are alarm packeges available which do not come with remote control handsets. They learn the frequency of the cars current handset as long as it does not have code hopping. It has the complete features of any other alarm less the annoyance of carrying two handsets.

I know this because I sell them here in Ireland.

Posted By: omega
Date Posted: August 21, 2002 at 5:48 AM

Never heard of an alarm that learns the frequency of a factory remote, but there are many factory keyless interface alarms...

Among them are the DEI Hornet 700T, the Omega AL-100H, and also the Audiovox Pursuit PRO9232 add-on alarm systems. The AL-100H is available for not too much on eBay for only $20 US + shipping (or $40 BuyItNow + shipping)...

Posted By: 1nicemustang
Date Posted: August 21, 2002 at 7:29 AM

my year is 2001.......i am trying to get a ford alarm working on it but having problems with it self arming still and no horn chirp.

i can arm and disarm with the factory remotes..but if i disarm the system....1 minute later it arms again. the horn blows when disarmed and when triggered but not when armed.

both switches are in the correct position inside the module. its a system 4. maybe the module is bad? ive tryed the fax back system to no avail. any help??

-------------
Lee