Print Page | Close Window

Clifford 3.5 in 2004 Ford F150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=30477
Printed Date: May 12, 2024 at 11:16 PM


Topic: Clifford 3.5 in 2004 Ford F150

Posted By: Duke1906
Subject: Clifford 3.5 in 2004 Ford F150
Date Posted: April 16, 2004 at 8:34 AM

Anyone put a Clifford 3.5 in 2004 FOrd F150. If so please post the wiring colors.  Thanks



Replies:

Posted By: sroth140
Date Posted: April 16, 2004 at 10:29 AM
grab a DMM and start testing.  youll probably need a 555U and find the BCM or use the DKP for most wires.  the constants at the ignition harness supply 20amp max.

-------------
MECP certified installer



Posted By: raydawg357
Date Posted: April 16, 2004 at 1:19 PM

Damn SRoth, why tell everyone that and do away with this site.  Here you go Duke:

12v    GREEN/ voilet; 

Igntion = blue/green; 

 Starter = RED / blue;

Accy = BLACK/ green; 

Key sense = BLACK/ pink

parking lights (+) = brown  @ headlight switch

brake (+) green @ brake

lock (-) pink / YELLOW   drivers kick   (-) w/ factory keyless, 5 wire without

unlock (-) pink/green

door trigger (+) BLACK/ blue @ drivers kick or in headlight switch

tach = tan @ injector

speed sense = bray/black @ pass side firewall

Use a Ford PIK (1L2Z) Pats or any key in box type bypass



-------------
Do it right the first time


Print Page | Close Window