starter disabler

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31889
Printed Date: June 09, 2024 at 3:16 PM

Topic: starter disabler

Posted By: p71-cruiser
Subject: starter disabler
Date Posted: May 10, 2004 at 12:07 AM

Is the relay powered all of the time when the alarm system is armed for this feature? if it is then how does it not run your battery down after parked a couple of days? Anyone see any problems if I where to use this feature for the fuel pump cutoff?

Thanks for your help advance.

By the way the alarm is an dreaded bulldog pro 6002. posted_image

Thanks again posted_image

Replies:

Posted By: CutDog504
Date Posted: May 10, 2004 at 1:46 AM

Wire the positive side of the coil on the starter kill relay to an ignition wire, but make sure its an ignition that is hot during cranking also. That way, the relay is mot energized the entire time the alarm is armed, but it WILL energize if someone tries to start the car.

Posted By: RufNUSD
Date Posted: May 10, 2004 at 11:17 PM

PS make sure you are using 87a and 30 for breaking this connection and that your alarm throws ground while armed GWA. Youve almost got a bulletproof PT.

-------------
Someone pass me that bottle.

Print Page | Close Window