Matrix RS2 Siren Tone Sequence
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32104
Printed Date: June 10, 2024 at 4:44 PM
Topic: Matrix RS2 Siren Tone Sequence
Posted By: oreo lover
Subject: Matrix RS2 Siren Tone Sequence
Date Posted: May 13, 2004 at 2:56 PM
Is there any way to get this siren to simply sound ON and OFF. I don't like the way it goes thru all the different tones and noises like a dying cat who was just run over by a car. WEEEEEOOOooo WEEEEEOOOooo bbllllLLLLLOOOOPPP bbllllLLLLLOOOOPPP BBBIINNNNGGGGG BBBOONNNNGGGGG. Please tell me I can change this annoying sound to a regular Police style siren.
Replies:
Posted By: hawkinstaller02
Date Posted: May 13, 2004 at 3:11 PM
Some alarms you can program to you own sound, dei for example. Or, get a siren from a police car, and wire it to your alarm.
-------------
Did that work???????
-Installer-
Posted By: oreo lover
Date Posted: May 13, 2004 at 3:44 PM
I think the brain relays the information to the siren for the sound, no? I don't think the siren has any effect on what tones are produced. Am I right?
Posted By: hawkinstaller02
Date Posted: May 13, 2004 at 3:57 PM
If you just wire the siren to the batt. what kind of tones does it make??
-------------
Did that work???????
-Installer-
Posted By: x6369x
Date Posted: May 13, 2004 at 4:27 PM
If you open the siren, you'll see 6 traces on the circuit board (labeled 1-6), and each is the corresponding siren sound.
Listen to the siren and decide which sounds you want, then cut the traces of the sounds you don't want.
-------------
Friends Don't Let Friends Bump Stock.
Posted By: sroth140
Date Posted: May 13, 2004 at 4:30 PM
DEI sirens get a trigger from the brain and the siren generates the different sounds. you can cut the little loops on the back of the siren to delete different sounds.
-------------
MECP certified installer
Posted By: oreo lover
Date Posted: May 14, 2004 at 10:34 AM
Cool! The siren does have 6 sounds. Can I jump 12V to the individual traces to produce the different sounds? Just to make sure I am not cutting the wrong trace, or is the order that they play actually the order that is numerically labeled?
Posted By: x6369x
Date Posted: May 14, 2004 at 11:03 AM
oreo lover wrote:
Cool!
The siren does have 6 sounds. Can I jump 12V to the individual traces to produce the different sounds? Just to make sure I am not cutting the wrong trace, or is the order that they play actually the order that is numerically labeled?
The only way to hear the sounds is to power up the acutal red and black wire of the siren. And yes, sound 1 = trace 1, etc ... ------------- Friends Don't Let Friends Bump Stock.
Posted By: oreo lover
Date Posted: May 14, 2004 at 1:19 PM
I understand the trace issue now. One question though. Cutting 5 traces and leaving one will only allow the siren to produce one tone or sound. The brain does not know the siren's traces have been severed and will continue to send pulses to try to change the sounds. What will happen? Will the single trace that is left cease to sound during the 5 other cycles or will the brain's pulses simple be ignored by the siren? Do I cut the pulse trace also? If so, which trace is the pulse trace?
Posted By: x6369x
Date Posted: May 14, 2004 at 2:07 PM
The alarm sends out pulses on arm/disarm and sends out a constant pulse during alarm. The actual siren controls the changing of the tones. The siren will play the sounds for 5 sec each of whatever traces are uncut. If you have 3 tones/traces left, the siren will play the 3 sounds and then start again for the siren alarm length (default=30 sec).
-------------
Friends Don't Let Friends Bump Stock.
Posted By: oreo lover
Date Posted: May 14, 2004 at 2:50 PM
So leaving 1 trace, the alarm will play that 1 trace constantly? If I leave two traces, the alarm will switch between those two tones ONLY, every 5 seconds, for the duration of the alarm cycle (if default is 30 seconds)? For Ex: (Sound #1 for 5 seconds)(Sound #2 for 5 seconds)(Sound #1 for 5 seconds)(Sound #2 for 5 seconds)Etc........No break in sounds between sound 1 and 2. Thanks for your patience x6369x
Posted By: x6369x
Date Posted: May 14, 2004 at 3:35 PM
You got it!
-------------
Friends Don't Let Friends Bump Stock.
Posted By: oreo lover
Date Posted: May 14, 2004 at 3:51 PM
Awesome. Thanks for your much appreciated help.
|