compustar cm3000 ground output when armed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32776
Printed Date: May 28, 2024 at 2:54 PM

Topic: compustar cm3000 ground output when armed

Posted By: wire4veins
Subject: compustar cm3000 ground output when armed
Date Posted: May 26, 2004 at 12:33 PM

we installed a CM3000 yesterday and having a tough time with the ground output when armed bleeding off the ignition since this wire is connected to the starter kill anti grind relay and they did not put a diode on the relay. We tried running a diode across 85 (ignition) and 86 (G.O.W.A) and its still getting a bleed through of ignition to the window module? Any ideas?

-------------
wire4veins
"D"
Precision Autosound - Owner
MECP Master Installer

Replies:

Posted By: Velocity Motors
Date Posted: May 26, 2004 at 1:01 PM

What size diode did you use ? If the diode doesn't work, then use a relay from the GOWR to trip a relay for the starter kill wire.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: wire4veins
Date Posted: May 26, 2004 at 4:37 PM

Thanks that worked using the GOWR on the starter antigrind relay. Thanks again.

wire4veins
Car Trix
Ogden, Utah

-------------
wire4veins
"D"
Precision Autosound - Owner
MECP Master Installer

Posted By: Velocity Motors
Date Posted: May 26, 2004 at 5:55 PM

No problemo posted_image

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window