window roll up module in MR2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32844
Printed Date: October 31, 2024 at 6:14 PM
Topic: window roll up module in MR2
Posted By: voltageGSR
Subject: window roll up module in MR2
Date Posted: May 27, 2004 at 3:47 PM
installing a window roll up module in mr2.
Wiring diagram pretty simple; I can access all the wires
I need in drivers kick panel? I do not have to run wires into the door?
Diagram shows that module wires need to be between motor and switch thats why I am asking if ok to access wires in kick panel.
Wiring diagram shown:
https://www.the12volt.com/installbay/forum_posts.asp?tid=20761&KW=voltageGSR
however both the left up and the right down are listed as "Green"? If this is true; than how do I hook up the wires in the window rool up module (crimestopper cs-5201). Thanks!
(I LOVE THIS SITE! I am a beginner and nice to be able to get help from experts.)
Replies:
Posted By: Velocity Motors
Date Posted: May 27, 2004 at 4:45 PM
Best bet is to cut the wires between the switch and the motor in the door.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: voltageGSR
Date Posted: May 27, 2004 at 8:14 PM
than i have to run wires through the door?
will it not work if I cut the wires at the kick panel?
|