Door locks in Grand prix
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33155
Printed Date: June 03, 2024 at 7:06 AM
Topic: Door locks in Grand prix
Posted By: 12voltfan
Subject: Door locks in Grand prix
Date Posted: June 02, 2004 at 9:41 AM
I have a Python 1600XP alarm/rs that I'm installing in my 2001 grand Prix, I found some information on this site that says the door lock/unlock cables are on the driver side kick panel, does that mean that these cables are on the BCM connector, I found 2 on this connector that appeared to be it but I just want to make sure. Do I connect my alarm cables directly to the BCM connector cables or do they go somewhere different. Like the cables on the lock harness.
Replies:
Posted By: iskidoo
Date Posted: June 02, 2004 at 2:34 PM
oops wrong car before.
POWER DOOR LOCK
LIGHT BLUE in DRIVERS KICK PANEL or DRIVERS DOOR HARNESS
POWER DOOR UNLOCK
WHITE in DRIVERS KICK PANEL or DRIVERS DOOR HARNESS
If you test the wires when pressing the lock and unlock button and they give you a negative pulse then they should be the same wire as in the kick. So you should be able to connect there. Make sure all doors are caught by these wires including the drivers. The BCM should be low enough current draw to connect directly but relays are always the safer bet.
|