ignition input and out?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33728
Printed Date: May 19, 2024 at 2:37 PM
Topic: ignition input and out?
Posted By: sincere0219
Subject: ignition input and out?
Date Posted: June 12, 2004 at 7:18 AM
How can I figure out what the hell a ignition input and output is in a 1990 Honda Prelude. The manual for the alarm gives the same description except one is input and one output.
Replies:
Posted By: Velocity Motors
Date Posted: June 12, 2004 at 9:13 AM
The ignition input and output are the same wire ( BLACK / YELLOW ). They do two different things for the system, one is to sense that the vehicle has the key in the ignition ( this is the input ) and the other is for remote start ( output wire ) to engage the igntiion system.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: zargon
Date Posted: June 12, 2004 at 4:29 PM
ignition in and out is the same wire its purpose is to sense when the key has turned on the ignition and to disc ignition from an aftermarket alarm already in the car. if you dont have an aftermarket alarm you dont have to worry about ign out.
-------------
zargon ruler of estranorth
|