aladdin alarm & Led help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33922
Printed Date: May 23, 2024 at 9:53 AM

Topic: aladdin alarm & Led help

Posted By: Aschaffer
Subject: aladdin alarm & Led help
Date Posted: June 15, 2004 at 12:17 PM

Is there any way to wire an LED into this alarm, so it will blink when the alarm is armed? I know of the one on the control unit, but I want to wire another one to it, is there a way?

Replies:

Posted By: CHaseHeadrick
Date Posted: June 15, 2004 at 3:03 PM

take it apart and see if you can extend the leads with some wire. i wouldn't use any smaller than 24awg wire though.

-------------
93 4RUnner
Alpine H/U
Alpine Mids/Highs
Alpine Security w/DEI remote
start and window control
Rockford Lows.

Posted By: Aschaffer
Date Posted: June 15, 2004 at 4:39 PM

take apart the transmitter? And wire up some led's to the existing led in the transmitter?

Posted By: CHaseHeadrick
Date Posted: June 15, 2004 at 6:51 PM

yeah. you do mean the "brain" right? not the remote. the remote is the transmitter.

-------------
93 4RUnner
Alpine H/U
Alpine Mids/Highs
Alpine Security w/DEI remote
start and window control
Rockford Lows.

Posted By: Aschaffer
Date Posted: June 16, 2004 at 1:13 PM

OK... The only thing that currently has a blinking light is the reciever thing that recieves the signal from my remote. It is in some horrendous huge nasty platic case that I have out of view, sooo... No blinking light. in sight. Does anyone know how to wire another blinking light up, or do I have to take apart the plastic reciever and make an attempt to wire something up to inside of that? Thanks guys!

Posted By: Aschaffer
Date Posted: June 25, 2004 at 9:20 AM

Bump... Anyone know about this?

Print Page | Close Window