Installers... anyone famliar with AvantGuard 4?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=3441
Printed Date: May 31, 2024 at 8:54 PM
Topic: Installers... anyone famliar with AvantGuard 4?
Posted By: gpgtp00
Subject: Installers... anyone famliar with AvantGuard 4?
Date Posted: September 08, 2002 at 3:24 PM
Hey fellas.. just wanted to know if anyone had any tips for installing the AvantGuard 4? Thanks ~Ed
Replies:
Posted By: ThurzNite
Date Posted: September 15, 2002 at 6:25 PM
I'm thinking about buying this and installing it myself...looking at the avantguard 3 wiring diagram, looks like a lotta wires! I've installed an Avital Pheonix2 and AVital Diablo2...how much more difficult is the Avantguard4?
Jae
-------------
Posted By: gpgtp00
Date Posted: September 15, 2002 at 7:55 PM
It does have a crap load of wires. Its really not that bad to hook up though. I like the alarm. Heres a link to the install .pdf file is you want an idea about the wiring. https://www.directed.com/guides/pdfs/Clifford/igs/avantguard4_install.pdf
Posted By: zzooomm
Date Posted: September 16, 2002 at 11:55 PM
I am reinstalling mine in the morning in my new car. Mount all componets first, then wire. I didn't have an install manual so I had to wing it. I had the wire diagram. I mounted the light sensor in a place where the lights on my vehicle were on all the time. It was to dark. Just take your time and do it right, don't be in a hurry. I took a week to install it, and you couldn't find any of the clifford wires. All those wires look scary, but it isn't to bad if you have installed alarms before. I have 15 years experience doing it.
|