disarm for durango 2004
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=34566
Printed Date: May 17, 2024 at 3:52 PM
Topic: disarm for durango 2004
Posted By: boombonics
Subject: disarm for durango 2004
Date Posted: June 25, 2004 at 1:44 PM
hello having trouble on a 2004 dodge durango with a hemi, the person has to use both alarm and oem transmitter now to disarm the suv to open the door, I installed a omega max, can someone help please
-------------
dj
Replies:
Posted By: derek123
Date Posted: June 25, 2004 at 2:48 PM
OEM alarm should disarm with IGNITION.
Posted By: swamprat323
Date Posted: June 25, 2004 at 2:56 PM
durango has a disarm wire, did you connect to this.
Posted By: JWorm
Date Posted: June 25, 2004 at 7:01 PM
I've never done one, but from what I have read you need to split your disarm wire and have it pulse the ignition and transponder bypass module at the same time (The vehicle must see the ignition turn on and a valid key). Not sure, but you may have to pulse the 2nd ignition too.
Posted By: NowYaKnow
Date Posted: June 25, 2004 at 7:12 PM
Posted By: boombonics
Date Posted: July 19, 2004 at 8:51 PM
swamprat323 wrote:
durango has a disarm wire, did you connect to this.
Am I supposedto connect to the dis arm wire and unlock wire? My notes tell me to connect to one wire and it will do both,but that is wrong also ------------- dj
Posted By: extreme1
Date Posted: July 19, 2004 at 9:48 PM
there is no disarm wire for the 04 Durango.
You have to energize both Ignitions and Immobilizor as descriped in above diagram.
Just adding an alarm to that vehicle is not usually easy to do, might as well do the who deal with a starter
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: swamprat323
Date Posted: July 19, 2004 at 10:11 PM
Are we talking about Remote start or just to dis arm the factory system.
Alarm Disarm light GREEN/ orange 1565 OHM resistor, Arm is same wire (but should not need it, but chryslers some that have passive arming) through a 644 OHM resistor.
The other wire guied is they same but it says if "doulb" pulse the disarm wire it unlock the doors. Not sure on that that what it says, never done one on a durango
Posted By: extreme1
Date Posted: July 19, 2004 at 11:36 PM
that wire does not exist in the 04 HEMI durango.
the factory alarm arms/disarms only through factory remote or disarms when you turn on the ignition with the proper key.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Posted By: swamprat323
Date Posted: July 20, 2004 at 12:03 AM
i figure the be no difference between a hemi and a regular, i make a note of that, learn somethign everday.
Posted By: extreme1
Date Posted: July 20, 2004 at 9:41 PM
THe 04 durango is the NEW body style, it comes standard with the 5.7l
And no there is no disarm wire.
-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
|
