Print Page | Close Window

86 Mustang Power Locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=35639
Printed Date: June 08, 2024 at 7:29 PM


Topic: 86 Mustang Power Locks

Posted By: LqDFx
Subject: 86 Mustang Power Locks
Date Posted: July 15, 2004 at 1:06 PM

I bought an 86 Mustang GT in Februry this year. When I got the thing home, I did an inventory of what all neded to be done to the car. One of the things is the Power Door locks do not work. Upon my deeper seach I found that one of the actuators is missing and the other is cut. Tracing the wires from the switches I found that all the wiring has been cut out completely!

So here is my question: Can I use the stock actuators (buying another) and the factory switches make these work again without the stock wiring? I have a 6 position Buss Fuse panel that I put in for the custom wiring of the stereo since it to was cut out totally! What all will I need to do this? Relays and a power source? While I am at it would it be a good I dea to put remote locks on it too?

Thanks for any help I get,

Russell




Replies:

Posted By: LqDFx
Date Posted: July 16, 2004 at 5:17 PM

I am not sure, maybe it is not possible to do what I have asked. So is there any other way to get my power locks to work? A good aftermarket kit that anyone can recommend?


Print Page | Close Window