aftermarket door lokcs toy-corolla

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=36004
Printed Date: June 18, 2024 at 4:33 PM

Topic: aftermarket door lokcs toy-corolla

Posted By: SSteve
Subject: aftermarket door lokcs toy-corolla
Date Posted: July 22, 2004 at 4:07 PM

THANK YOU,

I WANT TO INSTALL DOOR LOCK ACTUATORS IN A 2004 TOYOTA COROLLA BUT I CAN'T DO IT BECAUSE THERE IS NO RHODS, THEY USED CABLES (LIKE THE TRUNK OPENER KIND) AND IT SEEMS LIKE THERE IS NOT WAY TO DO THIS.

PLEASE COULD ANYBODY GIVE ME A HINT

-------------
Steve

Replies:

Posted By: desh187
Date Posted: July 22, 2004 at 9:05 PM

It is not easy but you can if done very precisely.you would have to drill a hole on the door opening handle assembly to pass the actuator rod thru and then you have a little room where the rod attaches to door lock/unlock assy.

Posted By: arteaga777
Date Posted: July 22, 2004 at 9:43 PM

I have done it before all you have to do it cut a piece of the door lock cable insulation and attach the actuator rod to the inner thin cable.

Posted By: Drey
Date Posted: July 23, 2004 at 10:49 AM

sounds like a pain

Print Page | Close Window