Print Page | Close Window

Alarm will not stop - DEI Rattler 300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=37019
Printed Date: May 20, 2024 at 8:31 PM


Topic: Alarm will not stop - DEI Rattler 300

Posted By: defaz
Subject: Alarm will not stop - DEI Rattler 300
Date Posted: August 08, 2004 at 9:35 PM

I had this alarm professionally installed a year ago and it has given me absolutely no problems since.

Today I unhooked the black (chassis ground) wire from where it was screwed into my firewall. The second I hooked it back up my alarm started going off. This happens whenever I unhook my battery, so I thought nothing of it and pushed the "disarm" button on the remote.

It turns out that both of my remotes are no longer programmed to the brain, and nothing that I try will make it stop. I eventually had to unplug the main wire harness from the brain and walk away.

I searched and found a few posts asking a similar question and tried most of the remedies I could gather (most of which being ignition/valet switch programming...

Anything else I can try? I'm stumped...




Replies:

Posted By: defaz
Date Posted: August 08, 2004 at 10:01 PM
Nevermind I got it working...






Posted By: Teamrf
Date Posted: August 08, 2004 at 10:15 PM
defaz, didn't you ever hear that saying, "If it ain't broken, don't fix it." Same thing applies.

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.





Print Page | Close Window