Passlock 2, Obtaining Resitor Value?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=4042
Printed Date: June 01, 2024 at 6:56 PM
Topic: Passlock 2, Obtaining Resitor Value?
Posted By: diabloed
Subject: Passlock 2, Obtaining Resitor Value?
Date Posted: September 29, 2002 at 4:25 PM
ok i know how to obtain the resistance value, but i just want to verify which wires i need to hook together with the resistace. from the black wire...resistors.... to the key side of the yellow wire? oh yeah it's on a 2000 Impala.
Replies:
Posted By: SnomanF150
Date Posted: September 29, 2002 at 6:23 PM
the resistor will go from the ORANGE / black to the PLII side of the yellow wire.. not the key side..
-------------
George
David's Car Stereo
Baton Rouge, LA
Posted By: diabloed
Date Posted: September 29, 2002 at 6:58 PM
people keep saying the ORANGE / black wire? the wires that i have are yellow,bleack,white. there are located on the middle of the ignition harness and are partially taped together. so would those be them? if so do i substitte the ORANGE / black with the black?
Posted By: Velocity Motors
Date Posted: September 30, 2002 at 5:21 AM
Resistor goes on BLACK wire but if you want to permanently disable Passlock you use the YELLOW module side wire and leave keyside unattached.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: SnomanF150
Date Posted: September 30, 2002 at 3:09 PM
actally is depends on the car.. they can be black, yellow and red\white, or orange\black, yellow and RED / white.. .. Since when does GM have to many ANY sence whatsoever?? ------------- George
David's Car Stereo
Baton Rouge, LA
Posted By: par3721
Date Posted: October 01, 2002 at 3:56 AM
sounds like you have passlock I system not II. with those wire colors velocity has permenent bypass relay diagram
|