help with troubleshooting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40681
Printed Date: May 31, 2024 at 6:32 AM

Topic: help with troubleshooting

Posted By: mobile1
Subject: help with troubleshooting
Date Posted: October 11, 2004 at 11:51 AM

When testing a reverse polarity rest at ground door lock system, if a wire shows 12 volts for lock and you cut the wire in half both lock and unlock will stop working every time T/F??????????

I swear I can remeber this not working before but i don't know

Replies:

Posted By: mo12v
Date Posted: October 11, 2004 at 12:54 PM

That is correct:

U have 2 wires:
One is Ground on Lock which reverses to 12 volts on UnLock
One is 12volts on Lock which reverses to Ground on Unlock
When you cut one in half , that cuts the circuit

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: draasch
Date Posted: October 12, 2004 at 7:40 AM

what is the yr make and model of car???

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: mobile1
Date Posted: October 12, 2004 at 12:29 PM

its a generalized question. should it be this way on every car, or are some different. I think Mo is right. thanks

Print Page | Close Window