Print Page | Close Window

correct wire for remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42114
Printed Date: May 08, 2024 at 1:41 AM


Topic: correct wire for remote start

Posted By: gcorrea
Subject: correct wire for remote start
Date Posted: November 02, 2004 at 2:35 PM

what would be the correct wire to use for yhe remote start trigger. the alarm is a viper 350hv and i have two aux wires i can use. the alarms latched wire can actually be programmed to a validity output so i would have two useful outputs right? aside from the button configuration what would be the other difference.

-------------
gcorrea



Replies:

Posted By: zargon
Date Posted: November 02, 2004 at 5:22 PM
it doesn't matter and you can change the button configuration to how you want it.



Posted By: gcorrea
Date Posted: November 02, 2004 at 7:52 PM
 thats what i thought. thank you.

-------------
gcorrea


Print Page | Close Window