Print Page | Close Window

Viper 700 ESP ignition input

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42455
Printed Date: May 28, 2024 at 2:06 PM


Topic: Viper 700 ESP ignition input

Posted By: SAyeed khan
Subject: Viper 700 ESP ignition input
Date Posted: November 07, 2004 at 7:11 PM

In this alarm there are two wires for ignition kill. what i want to know is if u connect this ignition kill ,do u still have to connect the + ignition input , and if u do have to connect it which side of the circui do i connect it




Replies:

Posted By: johnnydi77
Date Posted: November 09, 2004 at 7:04 PM
That relay is the starter kill and all you do is put one wire to ignition and the other connects directly to the yellow ignition input on your alarm. All the 2 wires are common. Be sure to hook the yellow to ignition and not accesory or else your starter kill won't work.

-------------
John J. DiStefano Jr.


Print Page | Close Window