Heated Seats in Grand Prix

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42467
Printed Date: June 08, 2024 at 8:44 AM

Topic: Heated Seats in Grand Prix

Posted By: xxmattfxx
Subject: Heated Seats in Grand Prix
Date Posted: November 07, 2004 at 9:30 PM

I have a 2000 grand prix. When I use my viper 791xv remote start on my car I would like for the heated seat to turn on. The LED in the switch is lit, but the actual heating element in the seat doesn't start until I put the key in. I installed the alarm/remote start myself. What do I need to do for there to be power applied to the heating element of the seat when remote started. Thanks

Replies:

Posted By: mogmit
Date Posted: November 08, 2004 at 12:27 AM

what have you tried so far?

Posted By: audiopro111
Date Posted: November 08, 2004 at 12:44 AM

you need to power up the orange and brown accesories and all of your ignition wires.

-------------
AudioPro111

Posted By: xxmattfxx
Date Posted: November 08, 2004 at 9:53 PM

I do not want to make the remote start to imitate if I had the key in...for instance I do not want the radio to play on remote start. I only want to know where I look to supply power to the heated seat.

Posted By: audiopro111
Date Posted: November 09, 2004 at 7:17 PM

The ignition would be the place to go. I wouldn't go directly to heated seat because those wires have to go through a relay then to fuse box etc sometimes the heated seat wire under seat has a different resistence value or voltage value and appling the wrong voltage during power up may fry heated seat module or brain on remote start.

-------------
AudioPro111

Print Page | Close Window