how do i test a wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42649
Printed Date: June 01, 2024 at 10:34 AM

Topic: how do i test a wire

Posted By: SAyeed khan
Subject: how do i test a wire
Date Posted: November 10, 2004 at 3:26 AM

1. voltage sensing 2. tach

Replies:

Posted By: daniel2002p
Date Posted: November 10, 2004 at 7:45 AM

1. voltage sense is not a wire, it is a option that alarms have so you do not have to hook up a tach wire.

2. to test for tach, put your DMM to AC and when the car is off it whould read 0V and when you crank it, it should vary between 1v - 6v when you rev the engine.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Print Page | Close Window