Print Page | Close Window

Viper 791 Question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=42803
Printed Date: May 08, 2024 at 8:59 PM


Topic: Viper 791 Question

Posted By: kevin1488
Subject: Viper 791 Question
Date Posted: November 11, 2004 at 10:56 PM

I have a 91 Accord and i have recently installed a Viper 791 and when i remote start my vehicle then hop in stick the key in a turn it and drive off i notice that on my key chain the icon for the exhaust is still on the display and even when i drive it and turn my vehicle off it is still there till i arm my car i have checked all my conections very well and my brake wire is hooked up that is one of the things i thought it was. DEI has no idea what it is they may think it is a bad Brain or remote please if anyone can help it would be apprecitaed thanks all...............



Replies:

Posted By: daniel2002p
Date Posted: November 11, 2004 at 11:14 PM

does it dissapear at any time while you are driving, like 10 or 20 mins after you have RSed the car?



-------------
2005 Toyota Corolla S
    1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!




Posted By: kevin1488
Date Posted: November 11, 2004 at 11:40 PM
No it does not..




Posted By: wblakes
Date Posted: November 12, 2004 at 12:57 AM
did you tried checking to see if your "Page Notification" is turned on for your remote? press and hold all four buttons at the same time. hear one long beep that means you're in programming mode. press (*) key to toggle on/off.





Print Page | Close Window