Question about light flash on 1997 E320.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43073
Printed Date: May 19, 2024 at 5:05 PM

Topic: Question about light flash on 1997 E320.

Posted By: Steve 90TTZ
Subject: Question about light flash on 1997 E320.
Date Posted: November 15, 2004 at 8:22 PM

I have the gray/black stripe and gray/red stripe hooked up at the light switch as it says from information I got from this site. They are hooked up with a relay to isolate the circuits, but only the two centre lights flash on the front of the car. Is there a way to make all the park lights flash? There are about 40 wires going to the switch itself.

Thanks in advance,
STeve

Replies:

Posted By: mo12v
Date Posted: November 15, 2004 at 9:29 PM

Meter these wires first

Parking Lamp

GRAY/WHITE & GRAY (+)

AT LIGHT SWITCH OR FUSE BLOCK

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: Steve 90TTZ
Date Posted: November 16, 2004 at 3:46 AM

There are numerous wires that have 12 volt with the lights switch in the park position. Which one(s) do I need?

Steve

Posted By: Steve 90TTZ
Date Posted: November 17, 2004 at 6:43 PM

There was no wire that was gray/white stripe and the gray one was hot at all times. I ended up splicing into 2 wires for the right and 2 for the left. 2 gray/black and 2 gray/red. They must have all isolated circuits because of the lamp monitor.

Thanks for the help,
Steve

Print Page | Close Window