ya...so i dont know what i did.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43091
Printed Date: May 10, 2024 at 6:05 AM
Topic: ya...so i dont know what i did.
Posted By: scarf12
Subject: ya...so i dont know what i did.
Date Posted: November 15, 2004 at 11:22 PM
well i have an audiovox ax700....i installed it about a month or 2 ago....and i was working on my car last night and i musta hit something??? like the alarm works and all but i get no CHIRPS or anything from the alarm wheni lock the car (not from the car or the remote...but the functions do work)....the remote shows the speaker X'ed, and i cant seem to figure out how to fix it! i read the manual, and it says NUTHIGN
does anyone know?
Replies:
Posted By: carguy411
Date Posted: November 15, 2004 at 11:51 PM
you might have put it in to valet mode
or you have silent arm and disarm feature enabled
Posted By: cgalvin29
Date Posted: November 16, 2004 at 2:33 AM
One way to check if its in valet mode or just silent arming/disarming is to arm/lock the vehicle and the n wait about 15-20 seconds then open the door from the inside, if the alarm goes off your not in valet mode. and means your just silently arming and disarming the vehicle i would lookat the manuel to see if it says anything about that.
|