Print Page | Close Window

Astro-Start RS-304 Transmitter coding

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=43402
Printed Date: May 11, 2024 at 2:27 PM


Topic: Astro-Start RS-304 Transmitter coding

Posted By: mikesmg
Subject: Astro-Start RS-304 Transmitter coding
Date Posted: November 20, 2004 at 1:23 PM

 Need help....

Code learning (additional remote control)

Thanks




Replies:

Posted By: cgalvin29
Date Posted: November 20, 2004 at 7:25 PM
if you caqn get to the dip switches on the module its 8up the press the brake then push any button on the remotes that you want coded in (up to 4) then put 8 back down and press brake to get out of transmitter learning mode. by 8 up i mean the eighth dipswitch, and only that dipswitch.



Posted By: mikesmg
Date Posted: November 20, 2004 at 9:23 PM
No dipswitches on this module.



Posted By: jrilla
Date Posted: November 20, 2004 at 11:26 PM
email me for the manual.

-------------
J Rilla

Owner/Installer


Print Page | Close Window